Pharma HMI · pharmaceutical mobile workstation · cGMP workstation · GMP workstation
A full range of pharmaceutical workstations designed for cGMP cleanroom manufacturing. Mobile carts for Grade C–D (ID-Flow 5), Grade B–C enclosed (ID-Flow 6) and Grade A–B critical zones (ID-Flow 9). Fixed wall-mounted HMI (ID-View). A non-GMP mobile option for adjacent areas (ID-Flow 3). One range, every zone.
The cGMP workstation range. Pharma HMI in fixed (ID-View) and mobile (ID-Flow) form factors. GMP workstation validation across Grade A–D, with each model specified for its target zone.
Trusted by the world's leading regulated manufacturers
The range
Four workstation options cover the full pharmaceutical manufacturing environment, from aseptic Grade A zones through to cGMP-adjacent labs and packaging areas. Pick by form factor (mobile or fixed), by cleanroom grade, and by whether the room is inside the GMP envelope.
Pharmaceutical mobile workstation · Grade C–D
The flagship mobile cart. 304L stainless, hot-swap batteries, validated for Grade C and D zones.
cGMP workstation · Grade C+
Fully enclosed stainless variant. Designed for the most demanding cGMP production lines.
Pharma HMI · fixed · Grade A–D
Wall-mounted sealed stainless monitor. For permanent operator stations on aseptic lines.
Mobile · non-GMP
Lighter-duty mobile option for QC labs, warehousing, and packaging areas outside the GMP envelope.
Decision guide
Three questions usually settle it. What cleanroom grade is the room? Does the operator move or stay in one place? Is the environment inside the GMP envelope or adjacent?
| If your environment is… | And the operator… | Look at |
|---|---|---|
| Aseptic processing, Grade A/B | Stays at a fixed station | ID-View fixed HMI |
| Aseptic processing, Grade A/B | Moves between process steps | ID-Flow 9 sealed mobile cart |
| Fill-finish, OSD, solid dose (Grade C/D) | Moves between process steps | ID-Flow 5 pharma mobile cart |
| Fill-finish, OSD, solid dose (Grade B/C) | Moves, enclosed build preferred | ID-Flow 6 enclosed cart |
| QC lab, packaging, warehousing (non-GMP) | Moves | ID-Flow 3 |
| Multiple cleanroom grades across one facility | Mixed workflows | Consult with our team |
Why Kinetic-ID
Not retrofitted from medical or office hardware. Engineered specifically for cGMP, GMP, and ISO Class environments.
Lithium battery system — two 500 Wh packs designed for continuous shift operation. Battery exchange in approximately 5 minutes, planned around natural workflow breaks.
Active deployments across Emerson DeltaV, Werum PAS-X, LabVantage, Siemens Opcenter, Rockwell FactoryTalk, and more.
Material certificates, welding procedure specifications, and validation documentation issued with every unit.
Get an ID-Flow unit into your cleanroom for evaluation before committing to a deployment.
NHS fleets in continuous service since 2019. 5-year Kinetic-Power warranty. Designed for decade-plus operational lifespans.
The problem
Every walk to a fixed MES terminal risks a transcription error and delays the batch. Operators lose 20–40 minutes per shift to the commute.
Paper-to-system transcription is the most-cited deviation source in FDA 483 letters. Each manual step is a CAPA risk.
Without floor-level visibility, QC and engineering see deviations only after the batch record is compiled, hours or days after they could have been corrected.
Specifications
These are the specifications for the standard pharmaceutical computer workstation (ID-Flow 5). Custom builds adjust dimensions, screens and battery to your environment.
| Overall dimensions (H × W × D) | 1180 × 640 × 560 mm |
|---|---|
| Chassis weight | Dependent on configuration |
| Stainless steel grade | 304L stainless steel |
| Surface roughness (Ra) | ≤ 0.8 µm |
| IP ingress rating | Ingress protection rated |
| Cleanroom classification | ISO Class 7–8 · EU GMP Grade C–D |
| Battery chemistry and capacity | Li-ion 500 Wh, hot-swappable |
| Rated runtime per charge | 8–12 hours dependent on peripheral load |
| Hot-swap time | ~5 minutes battery housing accessed from underneath |
| Wireless standard | Wi-Fi 6 (802.11ax) |
| Screen size options | Single 24" · Dual 24" |
| Peripheral support | Barcode scanner, label printer, thin client |
| Castors | Ø100 mm anti-static stainless stem brake-locking on diagonal pair |
Full IQ/OQ/PQ documentation packages available on request.
Standard chassis dimensions and configuration shown. Every unit is built to specification — dimensions, materials, battery, screens and peripherals are configured per deployment. Confirmed values issued at quotation.
Fully customizable
Cleanroom grade, stainless finish, battery, screens, peripherals and integrations, all configured to your specification.
Case studies
Active deployment across US life sciences sites integrating with Emerson DeltaV and Syncade.
Life Sciences
· ID-View fixed HMI
ID-View
Wall-mount and floor-pedestal fixed HMI across multiple production lines
24/7
Continuous sterile ophthalmic manufacturing, 316L stainless for daily disinfection
MES + EBR + DCS
Browser-based access at every operator station
Operator efficiency and bringing technology closer to operators improved satisfaction, leading to increased production and less waste.
Life Sciences
· ID-Flow 3, 5, 6 and 9
4
ID-Flow variants deployed across US life sciences sites
316L
fully sealed watertight stainless developed for this customer
DeltaV
+ Syncade · Emerson MES and DCS integration
With Kinetic-ID, you get exactly what you want, and they will focus it to your needs on a practical level.
ROI calculator
* Directional estimates based on operations expertise. Use your internal numbers for precision. Weeks/month: 4.33. Working days/week: 5. Maintenance defaulted to €250/cart/year from year 3. 3-year analysis period.
Integrations
Browser-based access to MES, LIMS, eBR, DCS and corporate IT. No new network segments, no cloud dependencies.
Compliance
Every ID-Flow 5 ships with the documentation your validation and QA teams need to clear change control and internal review.
Validation support: IQ/OQ/PQ documentation packages issued with every deployment. Change control and revision tracking supported per ICH Q9 risk management. Low particle-shed design suited to ISO Class 7–8 / EU GMP Grade C–D environments.
Deployment process
30 minutes. One site, one line, one application. We’ll recommend the right configuration.
Site survey, configuration spec, validation requirements signed off with your team.
A single unit on site for typical 30-day evaluation. Full validation support throughout.
Standard 6–8 week build, IQ/OQ/PQ documentation, 5-year Kinetic-Power warranty, ongoing support.
The range
ID-Flow 5 is one of six variants. Pick the form factor that fits your grade, battery architecture, and operator workflow, then configure every detail to your spec.
Lightweight laptop cart for support and non-regulated areas.
For labs, packaging and receiving. 250 Wh or 500 Wh fixed internal battery.
This page
Hot-swap batteries and flexible screen orientation. Single or dual monitor.
Electronically height-adjustable. Hot-swappable batteries. Dual-monitor.
316L stainless, fully sealed and watertight. Dual vertical monitors. For critical Grade A zones.
Wall or floor-mounted HMI. For space-constrained cleanrooms.
For your team
For Operations
Faster deviation response. No operator hours lost walking to fixed terminals. Battery system designed for continuous shift operation; two 500 Wh packs, planned battery exchange around natural workflow breaks.
For Quality
Reduced transcription risk. Change control is audit-ready. IQ/OQ/PQ documentation ships with every unit.
For Engineering
Supports your existing MES, LIMS, eBR and corporate IT. No new network segments to approve.
For IT / OT
TPM-backed endpoints. Validated Wi-Fi 6 stack. AD/SSO integration. No third-party cloud dependency.
Pilot programme
Get an ID-Flow unit on site to evaluate against your operational and validation requirements. Typical pilots run around 30 days, though we’ll work with your team on the right timeline. Site survey, setup support and IQ/OQ documentation included.
Pre-deployment review of cleanroom grade, network, peripheral requirements.
On-site configuration, operator walkthrough, validation support.
Full validation pack issued for change control review.
FAQ
ID-Flow 5 is specified differently across regions and functions: workstation, mobile HMI, cleanroom cart, stainless steel trolley. It is the same product, engineered for pharmaceutical-grade cleanroom mobility regardless of how it appears on your purchase requisition.
ID-Flow 5 is suitable for ISO Class 7 and Class 8 environments per ISO 14644-1, equivalent to EU GMP Grade C and Grade D. The 304L stainless chassis, ingress protection rated enclosure and low particle-shed construction support cleanroom validation. Site-specific validation is supported by IQ/OQ/PQ documentation packages issued with every deployment.
Active deployments exist with LabVantage, STARLIMS, LabWare and Thermo SampleManager. Integration is browser-based over Wi-Fi 6 (802.11ax). Kinetic-ID does not host or process LIMS data. Audit trails and data stay inside your existing systems, compatible with 21 CFR Part 11 and EU Annex 11. Customer-validated configuration details are available on request under NDA.
The cart uses two 500 Wh Li-ion battery packs. Battery exchange takes approximately 5 minutes and requires removing access screws from the underside of the cart. Plan exchanges for shift changes or natural workflow breaks rather than mid-task — the brief operational pause is best treated as a scheduled handover rather than an interruption.
Standard configurations ship in 6–8 weeks from order confirmation. Custom configurations (specific peripheral bundles, branded fascia, non-standard screen sizes) add 2–4 weeks. Every unit ships with IQ/OQ documentation and a validated delivery file.
Yes. Get an ID-Flow unit on site to evaluate against your operational and validation requirements. Typical pilots run around 30 days, though we’ll work with your team on the right timeline. Site survey, setup support and IQ/OQ documentation are included.
ID-Flow 9 is the right product for Grade A and B critical zones — fully sealed 316L stainless, purpose-built for aseptic processing. ID-Flow 5 is specified for Grade C and D environments. We can recommend the right product based on your room classification and operator workflow.
Tell us about your site (the cleanroom grade, the operator workflow, the MES or LIMS already on the floor) and we'll recommend a configuration from the range. Not a sales call. A technical recommendation you can take back to your validation team.
The full ID-Flow range, cleanroom grades, IP ratings, battery architectures, and IQ/OQ/PQ validation support.
A member of the Kinetic-ID team will get back to you within one business day with a product recommendation.
If this isn't quite the right fit
